- The double-sided panel cladding is made of KRAFT paper coated with aluminum (AL).
- The core of the board is made of rigid polyisocyanurate foam (PIR) with very good insulating and fire retardant properties.
- The edges are milled to facilitate installation and improve thermal insulation. Milling can be performed as follows: FIT – straight edges, LAP – stepped, TAG * – tenon and groove.
* The surface of the cut slab is reduced by 15mm
TermPIR® AL application technologies
λ D = 0,022
FIT – Straight edges, LAP – Stepped *, TAG – Thorn groove *
from 20 to 250 mm
40
50
60
80
100
120
150
180
200
220
250
1,35
2,30
2,75
3,70
4,65
5,55
6,95
8,35
9,30
10,20
11,60
0,55
0,44
0,37
0,28
0,22
0,18
0,15
0,12
0,11
0,10
0,09
* milling: LAP and TAG – the surface of the slab coatings is reduced by 15 mm
* Milling: LAP is available for slabs from 30 mm and for orders over 2000 m2, TAG for slabs from 40 mm
TermPIR foil plates as a new generation universal insulation
The company “PANELS SERVICE UKRAINE” is engaged in the sale of high quality termPIR foil. On sale standard sizes of slabs 600 x 1200 and 1200 x 2400. However, the client should apply for an individual production of material in the size 1000 x 1200; 1200 x 1200; 1800 x 1200; 1200 x 3000.
Characteristic
Distinctive features of foil plates are characteristic:
- The panel has a double-sided Kraft paper cladding covered with an aluminum base.
- The slab filler is made of a polyurethane foam base, with increased resistance to fire and excellent thermal insulation performance.
- The edges are milled, which facilitates the assembly of the boards. There are several types of milling: FIT – straight edges, LAP – stepped, TAG * – tongue and groove. The latter version has a reduced surface of the cut slab by 15 cm.
Properties
Softness and elasticity allow the heat-insulating material to bend easily, cut, pierce, stick. This makes it possible to use it as a vapor barrier, waterproofing, heat-insulating layer, depending on the place of application. The mounting area is irrelevant. During insulation, it is applied on a flat, spherical, uneven, convex surface.
Benefits:
- corrosion resistance;
- resistance to high temperatures.
- does not ignite;
- harmless to health;
- it has excellent steam, hydro, thermal insulation characteristics.
The material is in an acceptable price range, therefore it is available for buyers with middle and low income.
Application
The company “PANELS SERVICE UKRAINE” recommends buying foil-based slabs for customers, if it is necessary to insulate the attic, floor, balcony, loggia, wall windows. The material is perfect for chimney insulation. Protect the house from rainfall, moisture penetration into walls or other locations where foil plates were installed.
You can also use the material to insulate baths, pipes, fireplaces, stoves, saunas, other architectural forms and their individual elements.
We guarantee that this heat-insulating material will retain its properties for decades, since in such a design it does not deteriorate under the influence of natural factors.
Delivery of material across Ukraine is carried out as soon as possible. Check with the sales department on how to purchase a product.