- Double-sided bituminous lining (BT).
- The core of the board is made of rigid polyisocyanurate foam (PIR) with very good insulating and fire retardant properties.
- The edges are milled to facilitate installation and improve thermal insulation. Milling can be performed as follows: FIT – straight edges, LAP – stepped, TAG * – tenon and groove.
* The surface of the cut slab is reduced by 15mm
λ D = 0,026 for thickness: 20 – 79 mm
λ D = 0,025 for thickness: 80 – 119 mm
λ D = 0,024 for thickness: ≥ 120 mm
FIT – Straight edges, LAP – Stepped *, TAG – Thorn groove *
from 20 to 250 mm
40
50
60
80
100
120
150
180
200
220
250
1,15
1,90
2,30
3,20
4,00
5,05
6,30
7,55
8,40
9,25
10,50
0,65
0,52
0,43
0,31
0,25
0,20
0,16
0,13
0,12
0,11
0,10
* milling: LAP and TAG – the surface of the slab coatings is reduced by 15 mm
* Milling: LAP is available for slabs from 30 mm and for orders over 2000 m2, TAG for slabs from 40 mm
TermPIR board (covering – bituminous)
PIR-plate Bitumen is a type of insulation made of polyisocyanurate foam, which on the one hand is covered with fiberglass, and on the other with the same material, but pre-impregnated with bitumen.
Thermal insulation material is in great demand for the arrangement of roofs of buildings and structures for various purposes with flat roofs or roofs with a reinforced concrete base.
In addition, termPIR board is used for external insulation of wall basement surfaces for bitumen-polymer surfacing waterproofing.
The main advantages of our products
Immediately, we note that the catalog of our company LLC PANELS SERVICE UKRAINE offers a large selection of heat-insulating material that meets modern standards, which is ideal for the implementation of projects of any complexity. TermPIR boards (covering – bituminous) differ favorably:
- High strength, which ensures durability of operation, regardless of the conditions of use;
- Low vapor permeability, the filler has a closed-cell structure, which prevents moisture from moving through the material, so that there is no negative impact on the mechanical and thermal properties of the slab;
- Low thermal conductivity, the indicator is in the range of 0.020-0.025 W / m ° C. The use of this material will completely eliminate heat losses with a minimum layer thickness;
- Low density (30-35 kg / m3), the use of this insulation allows to reduce the load on the load-bearing structures of the building, to reduce the metal consumption.
The production of heat-insulating material is carried out taking into account technologies, one of the advantages is also the durability of use. Plates are capable of serving 45-50 years without losing their original qualities. PIR slabs are a professional solution for insulating the roofs of industrial buildings, large retail facilities, especially if additional equipment is planned to be installed on the roof.
Advantages of cooperation with PANELS SERVICE UKRAINE LLC
We are ready to offer our clients favorable, convenient terms of cooperation. In the catalog, products are offered in a large assortment, which will allow you to select and order them based on the requirements and characteristics of the upcoming work.
The use of our products will guarantee a high-quality result that will provide the room with comfort and ease of use for many years.
If required, we will advise and help with ordering. We will promptly deliver the purchased goods to any specified address. Call us right now at the phone number indicated on the website.